Motorbike Parts Australia · Workshop equipment
Lift your bike.
Upgrade your workshop.
Bring your motorcycle to a comfortable working height for servicing, cleaning and detailing. This 500kg motorcycle lift table combines a 1.9m steel platform with hydraulic foot-pedal and air-assisted lifting, so you can get more from every hour in the workshop.
FREE AUSTRALIA-WIDE DELIVERY · 1-year warranty · Australian support
A better-equipped workspace
A 500kg motorcycle lift table built around the job.
Make room for the work you enjoy. Raise your motorcycle through a 215–780 mm lifting range to bring the details into easier reach, from cleaning the lower fairings to inspecting components and carrying out suitable maintenance.
Hydraulic + air operation
Use the foot pedal for manual hydraulic lifting, or connect a compatible compressor for air assistance. Choose the method that suits your garage and the job.
A substantial steel platform
A 167 kg powder-coated steel construction and textured 1,895 × 605 mm deck create a dedicated platform for your motorcycle, with room to position the bike for servicing and detailing.
Control where it counts
A front wheel clamp and four tie-down points support correct positioning and restraint. Stepless hydraulic descent control lets you manage lowering.
The details make the setup
Space to position.
Access to work.
The full-width loading ramp provides an approach onto the 605 mm-wide platform. The front wheel clamp helps position the motorcycle, with four tie-down points for suitable restraints.
Castor wheels help you position the unloaded lift. Adjustable stabilisers establish its working position on a suitable level floor.
Always follow the supplied manual for loading, securing, support and operation.
Take a closer look
The working details.
Foot-operated controls
Use the hydraulic foot pedal when a compressor is not connected.
Hydraulic lifting system
A close-up of the cylinder and scissor frame that raise the platform.
Position and stabilise
Castor wheels help move the unloaded lift; adjustable feet establish its working position.
Why buy from Motorbike Parts Australia?
The equipment. The delivery. The people behind it.
Your lift comes with free freight, a one-year equipment warranty and Australian support from Motorbike Parts Australia. Get the workshop upgrade and a local team you can contact before and after your purchase.
FREE AUSTRALIA-WIDE DELIVERY
No more to pay for delivery — anywhere in Australia. Freight timing varies by postcode and freight scheduling. Call 0437 723 708 before ordering for estimated dispatch and arrival dates. We use your access details to plan delivery and unloading.
Australian support
Buy from an Australian-owned motorcycle parts business on the Gold Coast. Our team can help with product specifications, workshop planning and delivery questions.
1-year warranty
A clear equipment-specific warranty, with product and after-sales assistance through Motorbike Parts Australia. One team to contact before and after your purchase.
Questions before ordering? Call 0437 723 708 · Shipping information · Returns information
Know exactly what you are buying
500kg motorcycle lift table specifications
| Specification | Detail |
|---|---|
| Product type | Motorcycle lift table |
| Product brand | Fiernero |
| Maximum lifting capacity | 500 kg |
| Lifting operation | Manual hydraulic foot pedal or air-assisted hydraulic operation |
| Platform length × width | 1,895 × 605 mm |
| Overall length × width | 2,630 × 605 mm |
| Minimum published height | 215 mm |
| Maximum published height | 780 mm |
| Net unit weight | 167 kg |
| Construction | Powder-coated steel |
| Loading access | Full-width loading ramp |
| Front wheel clamp | 45° clamp design |
| Tie-down points | Four |
| Lowering | Stepless hydraulic descent control |
| Positioning | Castor wheels and adjustable stabilisers |
| Assembly | Some assembly required |
The 1.9m platform description is rounded from 1,895 mm. Overall dimensions refer to the assembled lift; freight dimensions and packed weight are confirmed separately.
Plan your setup
Your questions, answered.
Do I need a compressor?
No. The hydraulic foot pedal operates without compressed air. A compatible compressor is needed for air-assisted lifting; confirm pressure, air consumption and fittings against the operating manual.
Will it suit my motorcycle?
Check the complete loaded weight against the 500 kg rating, then compare wheelbase, tyre position, clamp compatibility and ground clearance with the 1,895 × 605 mm deck. Allow for the 2,630 × 605 mm overall footprint, loading access, working space and overhead clearance. Contact us about long, low or heavily accessorised motorcycles. This single-track platform is not confirmed for quads, trikes or sidecars.
What do I need for setup?
Some assembly is required. Arrange suitable handling for the 167 kg unit and use a level floor capable of supporting the lift and load. Follow the supplied manual for inspection, load positioning, restraints and mechanical locking or support before working. The wheel clamp does not replace restraints. Keep clear of moving parts, never lift people and reposition only when unloaded and fully lowered.
Can I remove the wheels?
The platform raises the motorcycle with its wheels resting on the deck. Wheel removal requires suitable additional supports and the procedures specified for your motorcycle and lift.
Are a compressor and tie-down straps included?
Four tie-down points and air-assisted operation are features of the lift. A compressor, straps and connection accessories are not confirmed as included; contact us to confirm your setup requirements.
When will my lift arrive, and is delivery free?
Delivery is FREE Australia-wide. No more to pay for delivery. This lift travels by freight, with timing dependent on your postcode and freight scheduling. Need it by a particular date? Call 0437 723 708 before ordering for estimated dispatch and arrival dates. Please share your address type and site access details so we can plan delivery and unloading. The 167 kg specification is net unit weight, not packed freight weight.
What warranty applies to this lift?
This lift has a 1-year warranty, with support through Motorbike Parts Australia. Call 0437 723 708 for product or warranty assistance.
Keep the deck clean and dry. Follow the manual’s inspection and maintenance schedule; stop using the lift if it is damaged, leaking or operating abnormally. More workshop content: Motorbike Parts Australia on YouTube.
Reviews
There are no reviews yet.